Comments on: IBM MegaRAID BIOS Config Utility RAID-10 Configuration http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/ Sun, 19 May 2013 18:59:41 +0000 hourly 1 http://wordpress.com/ By: xorl http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4614 Sat, 18 May 2013 09:43:35 +0000 http://xorl.wordpress.com/?p=3347#comment-4614 You should always backup your data when performing tasks related to hard disks.

]]> By: nitesh sharma http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4596 Sun, 17 Mar 2013 01:09:45 +0000 http://xorl.wordpress.com/?p=3347#comment-4596 HI friends,
can any one suggest if i add a new hdd through configuration wizard, is my data on disk will safe..or i have to take backup first..

]]> By: Don Matteo http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4595 Sat, 16 Mar 2013 03:34:53 +0000 http://xorl.wordpress.com/?p=3347#comment-4595 Thank, your post aid my to handle the Megaraid utility
Regards,
Don

]]> By: Bob http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4587 Wed, 20 Feb 2013 04:05:34 +0000 http://xorl.wordpress.com/?p=3347#comment-4587 Annnnnnnnd your AWESOME! thanks mate.

]]> By: Bharani(IBM server support) http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4572 Fri, 04 Jan 2013 14:50:49 +0000 http://xorl.wordpress.com/?p=3347#comment-4572 before doing Raid or arry u need to change jbod into Unconfigured Good

]]> By: Arthur http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4560 Fri, 16 Nov 2012 04:42:42 +0000 http://xorl.wordpress.com/?p=3347#comment-4560 Hi xorl

We have 8 disk and I can only see port 0 those 4 disks but not on port 1 another 4 disks in MegaRAID. However, I can see 8 disks in IMM2 without any issue. Do you have any suggestions?

]]> By: David http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4559 Thu, 15 Nov 2012 17:05:41 +0000 http://xorl.wordpress.com/?p=3347#comment-4559 Thank, i have to do this at this moment after a lot of year and help me to do it!!!

Regards.-

Dave.

]]> By: xorl http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4553 Mon, 29 Oct 2012 12:39:13 +0000 http://xorl.wordpress.com/?p=3347#comment-4553 Hi teng,

I don’t get your question here. My post was about using the RAID controller’s software (MegaRAID) which as far as I know it cannot be configured through server’s BIOS since the same server ships with different RAID controller(s) or in some cases even without one. Can you please be more specific?

Thanks

]]> By: teng http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4526 Thu, 18 Oct 2012 13:08:58 +0000 http://xorl.wordpress.com/?p=3347#comment-4526 once the raid 10 it configured on BIOS.. then we will run the ServeRaid disc right?, then there is a option in serveraid for the raid configuration? this should be bypass since the raid 10 is already setup in BIOS??

]]> By: poof http://xorl.wordpress.com/2012/08/30/ibm-megaraid-bios-config-utility-raid-10-configuration/#comment-4468 Thu, 20 Sep 2012 17:27:15 +0000 http://xorl.wordpress.com/?p=3347#comment-4468 we miss you xorl :((

]]>